Products
Building Chemicals Specialists
Uniguard
2 part Epoxy Paint for Floors
PRODUCT DATA
Uniguard Epoxy Paint for Floors is a two part Solvent Less Coloured Epoxy Resin Coat System and can be applied to many surfaces including concrete, steel and timber. Product is according to European Standard EN 13813:2002 Screed materials and floor screeds - Screed materials - Properties and Requirements.
It provides a smooth easily cleaned and durable surface, which is resistant to oil, dirt and many chemical environments.
PREPARATION
Surfaces must be free from loose dust, debris and other contaminants. Any oil or grease deposits can be removed by a hot detergent wash with a suitable cleaner available from Frinics Chemicals.
Any laitance or ingrained oil and grease will require mechanical removal by using grid blasting machine. Dust must be removed by vacuum machine before application of the product. Damage to substrate or incorrect falls should be rectified using suitable screed available from Frinics Chemicals before applying the Uniguard system.
SUBSTRATES
Concrete Substrate must be strong, stable and sound with a minimum compressive strength 25N/mm2.
Also substrate can be Steel and Timber.
For application on previous flooring please contact Frinics Chemicals Ltd for Technical services for specific advice.
MIXING
Uniguard Paint is supplied in a two part system, comprising of a UNI - Primer and Uniguard Paint, both have a base and hardener components.
UNI - Primer - Add the primer hardener to the contents of the primer base and mix thoroughly.
Allow to stand for 5 minutes before application onto prepared concrete.
Uniguard Paint - The pigmented base must be thoroughly stirred and agitated to disperse sedimentation and achieve consistency of colour. The hardener should then
be added to the base component and mixed thoroughly.
APPLICATION
The UNI - Primer and Uniguard Paint can be applied using a suitable brush or roller or airless spray to achieve an even substantial coat of the surface area in a sufficient thickness. Curing or over coating time is dependent upon temperature.
If UNI - Primer is left for more than 24 hours before overcoating it will be necessary to re-prime.
For general use 1 coat UNI - Primer and 2 coats of Uniguard Paint is recommended.
MAIN USES
It is used extensively for applications in warehouses, factories, and schools parking areas and other up to medium heavy wear industrial area. A slip resistant finish is also available by sprinkling aggregate into the surface.
ADVANTAGES
- Excellent abrasion resistance and durability.
- Oil and water resistant.
- Good Resistance to Dilute Chemical Solutions
- Easy to apply and has good Resistant to alkalies.
- Provides a smooth easily maintained floor.
- Suitable for Light to medium Warehouse Traffic and parking areas Traffic
- Dustproof, lightfast and colour stable.
- Slip resistant finish is also available.
Contact Us
Address
- Office/Sales
- 12, 28 October Street,
Dhali Industrial Area, 2540
Nicosia, Cyprus
- Postal Address
- P.O.Box 12593,
2251 Latsia,
Nicosia, Cyprus
E-mail Address
