Building Chemicals Specialists
Polyurethane Floor Coating
Uniseal Polyurethane coating is a one component pigmented synthetic resin seamless floor. It has a very good adhesion to most sound substrates and provides a dustproof easily cleaned surface, with good chemical spillage resistance.
Product is according to European Standard EN 13813:2002 Screed materials and floor screeds - Screed materials - Properties and Requirements.
It is a formulation of Bayer Germany and the resins are imported from Bayer.
Surfaces must be free from loose dust, debris and other contaminants. Any oil or grease deposits can be removed by a hot detergent wash with a suitable cleaner such as Uniclean, available from Frinics.
Any laitance or ingrained oil and grease will require mechanical removal by using grid blasting machine. Dust must be removed by vacuum machine before application of the product. Damage to substrate or incorrect falls should be rectified using Unibond screed before applying the Uniseal system.
Application of Uniseal to damp surfaces will result in ultimate loss of bond.
Concrete Substrate must be strong, stable and sound with a minimum compressive strength 25N/mm2.
For application on previous flooring please contact Frinics Technical services for specific advice.
Uniseal is supplied in a two part system, comprising of a primer and topcoat.
Primer – One component product. Mix thoroughly
Top Coat – One component product. Mix thoroughly
The primer and topcoat can be applied using a suitable brush or roller or airless spray to achieve an even substantial coat of the surface area in a sufficient thickness. Curing or over coating time is dependent upon temperature.
If primer is left for more than 24 hours before overcoating it will be necessary to re-prime.
For general use 1 coat primer and 3 coats of paint is recommended.
Uniseal is recommended for dust proofing and upgrading friable surfaces. It densifies and hardens within the porous structure of the floor finish, providing a floor which is dust free, and shows an improved resistance to chemicals, oils and water.
Uniseal has a most excellent ability to withstand splashes and spillages of a wide diversity of corrosive chemicals, embracing inorganic, organic acids, alkalies, solvents, salts, oils, fuels, etc.
For dustproofing and sealing application a four-coat system produces a really tough, hard and impermeable floor coating. A slip resistant finish is also available by sprinkling special sand into the surface.
Uniseal produces a hard elastic coating and therefore it is eminently suitable for use in a wide diversity of industries which includes food and beverages, chemical processing, pharmaceuticals, and engineering, etc., whilst it’s outstanding dustproofing properties makes it invaluable for warehouse, garages, car parks and general factory areas.
- Easy and fast to apply.
- Prevents Dusting.
- Good abrasion resistance.
- Durable Finish.
- Suitable for Light Warehouse Traffic and garages.
- Oil and water resistant.
- Good Resistance to Dilute Chemical Solutions
- Slip resistant finish is also available.